Seven Ways to Reduce Hot Tub Energy Use
Although many New Yorkers enjoy using hot tubs at their homes, they don't want to pay more than necessary for electricity. Some Empire State residents have found various ways to cut the power consumption of their heaters and pumps:
1. A small reduction in temperature can significantly decrease energy use. When people buy them, some tubs are set to 104 degrees by default. Many individuals find that a water temperature of 102F is just as enjoyable and noticeably more economical.
2. Well-maintained covers prevent heat loss from occurring when steam rises out of the water. They also stop rain, snow or wind from cooling down the hot tub. If a cover deteriorates and becomes waterlogged, it won't deliver the same energy savings as a new unit.
3. Foam insulation can reduce electricity consumption by as much as one-quarter. It decreases the amount of pump noise as well. For the best results, this material must thoroughly cover external surfaces and have a high R-value.
4. When New Yorkers install or move this equipment, they have the opportunity to put it in sheltered locations. The water heater will draw less power if a new hot tub New York isn't exposed to excessive wind or frigid air. For example, a screened porch offers substantial protection.
5. It's also feasible to save energy by building structures that protect existing tubs from rain and wind. People occasionally construct fences or walls alongside hot tubs. In addition to blocking the wind, they enhance privacy and keep trespassers away.
6. Many tub owners decrease pump power consumption by replacing or cleaning filters on a regular basis. This reduces the amount of effort it takes to move water throughout the system. People make filters last longer when they use properly sized covers and remove any floating debris.
7. Modern hot tubs usually feature built-in digital timers. It's possible to add this energy-saving equipment to some older models. Either way, a timer can instruct the system to only heat up water during times of day when people normally use the tub.
Another option is to replace old units with new models that were designed with energy efficiency in mind. When someone hot tub New York, it usually offers programmable controls, LED lights and/or additional power-saving features. Modern tubs have significantly more efficient pumps and heaters as well.